Rockford Fosgate Prime R150-2 150 Watt Stereo Amplifier Review
Product Code | B001P804T8 |
Product Rating | |
Price | |
Where To Buy | See More Details |
Customer Review | See More Reviews |
Product Details
- Amazon Sales Rank: #72819 in Car Audio or Theater
- Brand: Rockford Fosgate
- Model: R150-2
- Dimensions: 9.25" h x
4.00" w x
14.68" l,
.50 pounds
Features
- Two-channel amplifier delivers 75 watts at 2 ohms, 50 watts at 4 ohms, and 150 watts at 4 ohms bridged mono
- Selectable high-pass crossover at 80Hz or variable low pass crossover at 50Hz-250Hz, both with 12dB/octave slope
- Punch Bass adjustable bass level control of 0 to +12 dB centered at 45Hz
- RCA inputs for signal level input and pass-through jacks for system building
- The input gain control is preset to match the output of most source units
- Two-channel amplifier delivers 75 watts at 2 ohms, 50 watts at 4 ohms, and 150 watts at 4 ohms bridged mono
- Selectable high-pass crossover at 80Hz or variable low pass crossover at 50Hz-250Hz, both with 12dB/octave slope
- Punch Bass adjustable bass level control of 0 to +12 dB centered at 45Hz
- RCA inputs for signal level input and pass-through jacks for system building
- The input gain control is preset to match the output of most source units
Product Description
Rockford Fosgate Prime 150 Watt Stereo amplifer with on-board adjustable crossover, gain control. Amplifier features unregulated power supply, and on board Punch bass. CEA Certified RMS Power Rating 50 watts x2 @ 4 Ohms, 75 watts x2 @ 2 Ohms, 150 watts x1 @ 4 Ohms Briged. Visit www.RockfordFosgate.com 24 hours a day for technical support or call (800)669-9899 M-F 7 am to 5 pm MST.
Customer Reviews
Most helpful customer reviews
3 of 3 people found the following review helpful.
Extremely good value
By A. Bush
UPDATE 5/10/11:I have owned this amplifier for about 10 months now and I use it nearly every day. The amplifier still works perfectly, even after sliding around in my trunk due to my lazy "mounting" system (which is nothing at all). I have never felt that the sub doesn't deliver enough bass or experiences clipping or distortion due to the amplifier. I believe that the amp is actually more powerful than what I need. I have also put it to the test of endurance. I did a 14-hour nonstop drive to southern California, during which time I played my stereo constantly. The amp is still perfectly fine. Rockford Fosgate has made a very high-quality, reliable and durable product with the R150-2. I still highly recommend it.ORIGINAL REVIEW:I bought this amplifier to power a JL Audio 10" W1V2 subwoofer (with an RMS rating of approximately 150 watts).The amplifier arrived in high-quality packaging and included a certificate of testing, indicating that prior to leaving the factory it had functioned properly and produced an RMS wattage higher than its rated value. The set included the necessary fuse and some mounting hardware.The amplifier is a typical Rockford Fosgate high-quality product. Fit and finish are excellent and the product has a clean, simple design. The terminals and adjustment controls are rugged and well-labeled.Using a Rockford Fosgate installation kit, which I would recommend due to its similar good value and inclusion of all necessary cables, I was able to install this amplifier in my 1998 Kia Sephia in about an hour, including routing the power cable through the engine bay firewall (the most difficult aspect for me). I connected the signal and switch-on leads to an Alpine iDA-X200 receiver.Note: After installing and connecting all cables, be sure to turn the gain on the amplifier from "1" (which amplifies by a factor of 1...in other words, not at all) to a higher value, such as "10" for maximum power output. Otherwise, you will not be able to hear any output from the subwoofer or speakers. Also, if connecting to a subwoofer, be sure that the subwoofer is turned on and up to an appropriate level via the stereo receiver.Once I got everything set up correctly, I tested out the amplifier and was extremely happy with its performance. The bass from my subwoofer is clean, tight, and very loud, and by turning the "bass boost" feature on this amplifier to about halfway, I have more than adequate output with my subwoofer set to 5 of 15 on my receiver.The best part of this amplifier is its price. With a name like Rockford Fosgate and more than adequate performance for any reasonable music enthusiast (as long as your goal is not simply to be heard from blocks away), you would expect a higher price, but the R150-2 is one of the best value amplifiers that I was able to find, and I am absolutely satisfied with my choice.I have had this amplifier for a few weeks now and its performance continues to be flawless. It does get very warm, like any amplifier will, but keep enough airspace around it and there should be no problems.
2 of 2 people found the following review helpful.
good amp but payed 100
By cory
i bought this amp at a local audio dealer and same with the rockford p1 10" sub. And now looking at the price on amazon i should have came here first since i payed double at the local dealer when i bought it in june. but overall this is a good amp other than the fact it overheated once and since then no issues.
1 of 2 people found the following review helpful.
punchy and clear sound
By Chandran Johnson
Ive bridged it to run a 12 inch infinity subwoofer.I'm very happy with the performance.Good clean tight bass.